Genuine Bondtech CHT® Nozzle made from brass with Nickel coated surface.These nozzles are for High Flow applications.Suitable for non abrasive materials PLA, ABS, PETG etc..Main Bondtech CHT® AdvantagesHigher melt capacity by increasing the surface area of the heating wallsAffordable priceMachined with ultra-precisionBrass nozzle with Nickel coated surfaceFollows nozzle standards: RepRap (M6x1x7.5x12.5)May be used with 1.75 or 2.85mm hotends.Advantages of the Bondtech CHT® technology:Bondtech
CHT® nozzles split the filament into 3 thinner strands allowing to melt
the material from within. In doing so, the material melts faster and
higher flow rates can be used.Core Heating is a patented technologyRegistration number: EP3445568A1Nozzles
for 3D printers made of metal with at least one or a multitude of holes
to increase the surface area of the heating walls.Advantages of the Nickel CoatingA
Nickel coating is applied to our Coated Brass nozzles to provide
protection against corrosion, erosion, and abrasion. Nickel coated
nozzles have more corrosion resistance and lower coefficient of
friction, which allows slicker feeding of material and delays plastic
adhesion to the nozzle's surface.
Genuine Bondtech CHT® Nozzle made from brass with Nickel coated surface.These nozzles are for High Flow applications.Suitable for non abrasive materials PLA, ABS, PETG etc..Main Bondtech CHT® AdvantagesHigher melt capacity by increasing the surface area of the heating wallsAffordable priceMachined with ultra-precisionBrass nozzle with Nickel coated surfaceFollows nozzle standards: RepRap (M6x1x7.5x12.5)May be used with 1.75 or 2.85mm hotends.Advantages of the Bondtech CHT® technology:Bondtech
CHT® nozzles split the filament into 3 thinner strands allowing to melt
the material from within. In doing so, the material melts faster and
higher flow rates can be used.Core Heating is a patented technologyRegistration number: EP3445568A1Nozzles
for 3D printers made of metal with at least one or a multitude of holes
to increase the surface area of the heating walls.Advantages of the Nickel CoatingA
Nickel coating is applied to our Coated Brass nozzles to provide
protection against corrosion, erosion, and abrasion. Nickel coated
nozzles have more corrosion resistance and lower coefficient of
friction, which allows slicker feeding of material and delays plastic
adhesion to the nozzle's surface.
Genuine Bondtech CHT® Nozzle made from brass with Nickel coated surface.These nozzles are for High Flow applications.Suitable for non abrasive materials PLA, ABS, PETG etc..Main Bondtech CHT® AdvantagesHigher melt capacity by increasing the surface area of the heating wallsAffordable priceMachined with ultra-precisionBrass nozzle with Nickel coated surfaceFollows nozzle standards: RepRap (M6x1x7.5x12.5)May be used with 1.75 or 2.85mm hotends.Advantages of the Bondtech CHT® technology:Bondtech
CHT® nozzles split the filament into 3 thinner strands allowing to melt
the material from within. In doing so, the material melts faster and
higher flow rates can be used.Core Heating is a patented technologyRegistration number: EP3445568A1Nozzles
for 3D printers made of metal with at least one or a multitude of holes
to increase the surface area of the heating walls.Advantages of the Nickel CoatingA
Nickel coating is applied to our Coated Brass nozzles to provide
protection against corrosion, erosion, and abrasion. Nickel coated
nozzles have more corrosion resistance and lower coefficient of
friction, which allows slicker feeding of material and delays plastic
adhesion to the nozzle's surface.
